INSTALL: Removing E-Prime 2.0 via command line options [18386]

This article applies to:
E-Prime 2.0

Detail
As an alternative to removing from the Add/Remove Control Panel applet, E-Prime 2.0 can be removed through command line switches.

To open a command line prompt in Windows XP:

1) Navigate to the Start menu

2) Select Run

3) Within the presented dialog, type 'cmd'

4) Click the 'OK' button

In Windows Vista or Windows 7:

1) Navigate to the Start menu

2) In the Search box, type 'cmd'

3) Select 'cmd.exe' from the results.

To enter the uninstallation information into the command line prompt:

1) Copy the applicable line below

2) Open the cmd prompt following the steps outlined above

3) Right-click in the appropriate field

4) Select 'Paste'

E-Prime 2.0.1.70 to E-Prime 2.0.1.127

"[ProgramFilesFolder]InstallShield Installation Information\{ED585876-FA9C-4327-BDD3-72D5BE1A98E5}\setup.exe" /uninst