This article applies to:
This item was introduced in E-Prime 2.0 (22.214.171.124).
The SEQD and SEQH properties have been added to the ResponseData object in E-Basic.
- SEQD = The sequence number provided by the driver.
- SEQH = The sequence number provided by the hardware.
The SEQ, SEQD, and SEQH values will ideally be identical and continuous incrementing integers.
Any different behaviors are device specific and when not matching can lead to detecting errors in transmission between device and driver.
For further information on scripting using E-Basic, please refer to the E-Prime Command Reference (https://pstnet.com/ecr).