This article applies to:
The files available in the Downloads area of the Support site do not include the prerequisites. Please see the Download area for specific requirements for each version of E-Prime 3.0.
If you have an E-Prime 3.0 flash drive for the version you want to install, we recommend installing directly from the flash drive. If you have an E-Prime 3.0 flash drive for a similar version to the version you want to install (e.g., you want to install 22.214.171.124 and you have the 126.96.36.199 flash drive), you may use the flash drive to install prerequisites before installing E-Prime 3.0 from a download link on the Support site. Please use the links below if you do not have a flash drive with an installation of E-Prime 3.0.
.NET 3.5 SP1 Web Installation (varies depending on required components)
http://www2.pstnet.com/downloads/microsoft/dotnetfx35setup.exe OR http://www.microsoft.com/download/en/details.aspx?id=21
NOTE: This option requires web access throughout the .NET installation. If you do not have web access on the machine where you are installing E-Prime 3.0, select the Full Installation instead.
.NET 3.5 SP1 Full Installation (232 MB)
NOTE: On Windows 8/10 machines we recommend installing via Control Panel or an ISO. Please refer to the following for more information:
Dism.exe /online /enable-feature /featurename:NetFX3 /All /Source:E:\sources\sxs /LimitAccess
.NET 4.5.2 Web Installation (varies depending on required components)
NOTE: This option requires web access throughout the .NET installation. If you do not have web access on the machine where you are installing E-Prime, select the Full Installation instead.
.NET 4.5.2 Full Installation (68MB)
Sentinel HASP Driver (15 MB)
NOTE: Select the Sentinel HASP/LDK - Windows GUI Run-time Installer
Visual Studio 2008 Update (5 MB)
Visual Studio 2012 Update (4 MB)
NOTE: Select the x86 version if prompted.
Chronos Driver (optional)