The E-Run.ini file is essential in order for E-Prime to locate the Single Clock at run time. If this file is missing, or the machine is not connected to the Single Clock hardware, an error will occur. First, verify that the E-Run.ini file is in the correct file path:
Then, verify that the contents of the E-Run.ini file are accurately specified. On a machine using the Single Clock the options should be set to the following by default:
On an experiment development machine (i.e. not connected to or not using the Single Clock hardware) you should disable the Single Clock hardware by using a semi-colon to comment out the options, e.g., the options should be set to the following:
For E-Prime 2.0.10.x, please see See article 4017 (direct link coming soon).
This topic applies to: