[Timing]
; Clock scale factor for E-Prime to use.  This should only be applicable when serial communications
; and the defautl E-Prime clock are in use.   When socket communications are in use along with 
; a common hardware clock between E-Prime and Net Station clock scale should be specified as the 
; default value of 1.0000000000000
ClockScale=1.0000000000000

[Communications]
; Communications method used to communicate between E-Prime and Net Station ("socket" or "serial")
Method="socket"	

; A comma delimited string of parameters associated with the Net Station communication method
; specified above.
;
; When Method="socket"...
; 	use this parameter to specify the IP address and port of the remote Net Station 
;	computer, e.g. "168.254.100.1".  If no port number is specified the default port
;	expected by Net Station will be used.  If you want to use a different port number 
;	then append a colon and the port number to the IP address string, e.g. "168.254.100.1:55513".
;
; When Method="serial"...
;	use this parameter to specify the id of the serial port you want to use for serial
;	communications, e.g. "1" 
MethodParams=""