|
|
|
Forum Newbie
Group: Forum Members
Last Login: 4/30/2008 1:47:53 PM
Posts: 4,
Visits: 7
|
|
| I want to use the SRbox to collect some response time data, but don't want to record EEG. But when I run my experiment on the computer linked with Mac installed Net Station, it is said "make sure the clock functioning properly", so how can I disable the communication between the SRbox and net station so that I can get response time only? Thanks.
|
|
|
|
|
Forum MVP
Group: Administrators
Last Login: 2 days ago @ 8:36:44 AM
Posts: 480,
Visits: 1,064
|
|
| Note the following only applies to those using the single clock solution available with E-Prime Extensions for NetStation The error you are receiving is..
Unable to communicate with the clock. Please make sure the clock is functioning properly! This can occur on a machine the first time if NIAutoConfig has not been run (check manual for more info). The other would be that the connection (50 pin cable) between the E-Prime PC and the NetAmps/Single Clock is not connected. If you just want to run an experiment on a development machine that does not have the single clock solution, then the manual instructs on how to edit the E-Run.ini to do so.
|
|
|
|
|
Forum Newbie
Group: Forum Members
Last Login: 4/30/2008 1:47:53 PM
Posts: 4,
Visits: 7
|
|
| Thanks for your reply. The computer I want to run my RT experiment is the computer in our ERP lab (set up EEG recording) because I want to use the SRbox which gives more accurate timing. I can perfectly run experiment with SRbox and EEG recording, so the cable should be ok. Which manual should I check? I never come across "NIAutoConfig" at all. Could you give me further instruction? Thanks.
|
|
|
|
|
Forum MVP
Group: Administrators
Last Login: 2 days ago @ 8:36:44 AM
Posts: 480,
Visits: 1,064
|
|
| The E-Prime Extensions for NetStation manual desribes information on how to configure the integration of the systems. The E-Prime CD contains a Support folder on it that contains a DaqInfo.exe file. When run this will determine if the system can see the Digital I/O adapter configured on your system. This should be available off the start menu under the E-Prime branch. Although I am aware of EGI support staff occassionaly monitoring the PST User Forum, I would encourage you to contact EGI support directly if you continue to have configuration troubles. They can be e-mailed at support @ egi . com (spaces there to deter s p am bots) -Brandon
|
|
|
|
