Foot pedals
 
 
 
PST User Forum
Home       Members    Calendar    Who's On
Welcome Guest ( Login | Register )
        

Home » PST » E-Prime » Hardware Interfacing » Foot pedals

Foot pedals Expand / Collapse
Author
Message
Posted 1/15/2008 11:23:28 AM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 4/9/2008 11:17:12 AM
Posts: 3, Visits: 38
I need to create an experiment with the subject using feet to respond to the stimulus. In the description of the response box in PST web site is reported only one foot pedal connector (the number 8). It seems that number 7 is usable only for the refresh detector. Is it right or can I use the connector 7 for the second foot pedal?

Thanks in advance.

Sandro Bettella

Post #1109
Posted 2/28/2008 2:38:02 PM
Forum Newbie

Forum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum NewbieForum Newbie

Group: Forum Members
Last Login: 3/26/2008 2:14:07 PM
Posts: 1, Visits: 11
Sandro,

What you need to do is open the casing of one foot pedal, and wire it to the 40 pin connector on the other foot pedal. If you have the response box manual (little blue booklet) you can see on page 22 a diagram of this. I connected the second foot pedal to key 7 and grounded the two ground together. It takes a little bit of fiddling around with but it works.

If you need any extra help just email me, and I'd be willing to help.
Charmayne

cmhughes@purdue.edu
Post #1310
« Prev Topic | Next Topic »


Permissions Expand / Collapse

All times are GMT -5:00, Time now is 9:41am

Powered By InstantForum.NET v4.1.4 © 2008
Execution: 0.094. 10 queries. Compression Disabled.